Metalworking cutting fluid

Semi-Synthetic Cutting Fluid TY-3W

170 KG/Drum

Semi-synthetic systemNonferrous machiningMachining functions

TY-3W is a water miscible semi-synthetic cutting fluid for metal cutting and grinding, including aluminum and other nonferrous machining described in the supplied SDS. It combines lubrication, cooling, cleaning and rust protection. Packaging: 170 KG/Drum.

Semi-synthetic systemWater miscible fluid for metal cutting and grinding.

Nonferrous machiningThe SDS includes aluminum machining; the supplier sheet lists aluminum profiles and brass.

Machining functionsCombines lubrication, cooling, cleaning and rust protection.

Dilution stability recordThe SDS reports no separation, sediment or turbidity after a 5% dilution stands for 24 h.

Tell us the quantity, destination, workpiece material, machine type and machining operation.

Send Product Inquiry

Product Overview

The supplied SDS identifies TY-3W as a semi-synthetic machining fluid and describes a clear golden yellow concentrate. The supplier product sheet lists ferrous metals, stainless steel, aluminum profiles and brass among its material applications.

The semi-synthetic fluid is selected for the actual material, machine and working conditions. Confirm alloy suitability and dilution instructions before use.

Use and Dilution

The supplier product sheet lists a recommended dilution ratio of 1:15–20. It does not state whether the ratio is by mass or volume; confirm the preparation basis before mixing.

Select working conditions for the material and operation. Share the machine type, water quality and required machining performance with the technical team before commissioning.

Handling and Storage

Keep the product in its original, tightly closed container in a cool, dry, ventilated storage area. Protect from direct sunlight and heat and keep away from strong oxidizing agents.

Avoid prolonged skin contact and wear suitable protective gloves when handling. Follow the current SDS for handling and disposal of used machining fluid.

Technical Documents

Product identity and listed physical properties are based on the supplied SDS. Packaging, recommended dilution ratio and the listed material applications are based on the supplier product sheet. Request the current SDS and confirmed technical instructions for your process.

Bulk Supply

Supplied by MOSINTER GROUP in 170 KG drums. Please provide the quantity, delivery destination and packaging requirements for a quotation.

Key Features

Semi-synthetic system Water miscible fluid for metal cutting and grinding.
Nonferrous machining The SDS includes aluminum machining; the supplier sheet lists aluminum profiles and brass.
Machining functions Combines lubrication, cooling, cleaning and rust protection.
Dilution stability record The SDS reports no separation, sediment or turbidity after a 5% dilution stands for 24 h.

Technical Specifications

Properties reported in the supplied SDS. A 5% dilution is stated without a mass or volume basis. Confirm current technical instructions for the intended machining process.
Parameter	Value	Conditions / source
pH, 5% dilution	8.5–9.0	Dilution basis not stated in SDS.
Dilution stability observation period, 5% dilution	24 h	No separation, sediment or turbidity reported in SDS.

Supply and Procurement

MOSINTER GROUP supplies this product. Ningbo MOS Chemical Co., Ltd. is the website operating company and coordinates enquiries, documents and orders.

Product Questions

What is the recommended dilution ratio?

The supplier sheet lists 1:15–20 without stating a mass or volume basis. Confirm the preparation basis and working conditions before mixing.

What information is useful for product selection?

Provide the workpiece material, machining operation, machine and fluid supply conditions, water quality and purchasing quantity so that the application can be reviewed.