Metalworking cutting fluid

Fully Synthetic Cutting & Grinding Fluid TY-1

200 KG/Drum

Cutting and grindingLow foam profileCleaning and rust protection

TY-1 is a fully synthetic, water miscible cutting and grinding fluid with a low foam profile for high speed, high jet speed and high flow machining. It combines lubrication, cooling, cleaning and rust protection. Packaging: 200 KG/Drum.

Cutting and grindingOne full synthetic fluid type for both operations described in the SDS.

Low foam profileFor high speed, high jet speed and high flow applications listed in the supplier sheet.

Cleaning and rust protectionSupports workpiece cleaning and rust protection alongside cooling and lubrication.

Water miscibleThe supplied SDS states that the product mixes with water.

Tell us the quantity, destination, workpiece material, machine type and machining operation.

Send Product Inquiry

Product Overview

TY-1 combines lubrication, cooling, cleaning and rust protection for metal cutting and grinding. Its low foam profile supports selection for machines with demanding circulation conditions.

The supplied SDS describes a colorless transparent concentrate and a colorless transparent 5% dilution. Working conditions should be confirmed for the intended material and operation.

Use and Dilution

The supplier product sheet lists a recommended dilution ratio of 1:15–20. It does not state whether the ratio is by mass or volume; confirm the preparation basis before mixing.

Select working conditions for the material and operation. Share the machine type, water quality and required machining performance with the technical team before commissioning.

Handling and Storage

Keep the product in its original, tightly closed container in a cool, dry, ventilated storage area. Protect from direct sunlight and heat and keep away from strong oxidizing agents.

Avoid prolonged skin contact and wear suitable protective gloves when handling. Follow the current SDS for handling and disposal of used machining fluid.

Technical Documents

Product identity and listed physical properties are based on the supplied SDS. Packaging, recommended dilution ratio and the listed material applications are based on the supplier product sheet. Request the current SDS and confirmed technical instructions for your process.

Bulk Supply

Supplied by MOSINTER GROUP in 200 KG drums. Please provide the quantity, delivery destination and packaging requirements for a quotation.

Key Features

Cutting and grinding One full synthetic fluid type for both operations described in the SDS.
Low foam profile For high speed, high jet speed and high flow applications listed in the supplier sheet.
Cleaning and rust protection Supports workpiece cleaning and rust protection alongside cooling and lubrication.
Water miscible The supplied SDS states that the product mixes with water.

Fully Synthetic Cutting & Grinding Fluid TY-1

Technical Specifications

Properties reported in the supplied SDS. A 5% dilution is stated without a mass or volume basis. Confirm current technical instructions for the intended machining process.
Parameter	Value	Conditions / source
pH, 5% dilution	9.0–9.5	Dilution basis not stated in SDS.
Dilution stability observation period, 5% dilution	24 h	No separation, sediment or turbidity reported in SDS.

Supply and Procurement

MOSINTER GROUP supplies this product. Ningbo MOS Chemical Co., Ltd. is the website operating company and coordinates enquiries, documents and orders.

Product Questions

What is the recommended dilution ratio?

The supplier sheet lists 1:15–20 without stating a mass or volume basis. Confirm the preparation basis and working conditions before mixing.

What information is useful for product selection?

Provide the workpiece material, machining operation, machine and fluid supply conditions, water quality and purchasing quantity so that the application can be reviewed.